Home / News Center / Industry News / Die Forging Lower Anvil Block: Cast Steel Anvil Base with Heat Treatment and Wear-Resistant Topcoat

Die Forging Lower Anvil Block: Cast Steel Anvil Base with Heat Treatment and Wear-Resistant Topcoat

By:SourceFactories Updated on 2026/11/22

Forging operations often struggle with premature wear and misalignment in anvil blocks, leading to unplanned downtime and inconsistent part quality. Huixian Tengfei Machinery Manufacturing Co., Ltd. offers a cast steel lower anvil block for forging…

Applications & Markets

Forging operations across heavy industry face a persistent challenge: the lower anvil block of a forging hammer absorbs repeated high-energy impacts, and any compromise in its integrity leads to misalignment, uneven die wear, and unplanned downtime. For sourcing managers in the metallurgy and manufacturing machinery sectors, specifying a lower anvil that combines dimensional precision with surface durability is critical to maintaining production tempo. The cost of a single hour of unplanned downtime often exceeds the price of the wear part itself, making anvil block selection a strategic decision rather than a routine purchase.

The Die Forging Lower Anvil Block/Cast Steel Anvil Base for Forging Hammer from Huixian Tengfei Machinery Manufacturing Co., Ltd. addresses this demand directly. Built around a permanent cast steel form, the component is engineered for high-cycle forging environments where shock loads and thermal cycling are the norm. Heat treatment and a wear-resistant topcoat are applied to extend service intervals, while a machining tolerance of ±0.02mm helps preserve hammer alignment and reduce die wear. Buyers in automotive, construction, and energy equipment sectors—where crankshafts, connecting rods, and heavy gears are forged—will find this specification profile aligned with common requirements for precision forging hammers.

The product’s customizable nature allows adaptation to different hammer frame dimensions, reducing retrofit complexity and enabling replacement programs without extensive rework. With a production capacity of 30,000 tons per year, the supplier is positioned to support both spot replacement orders and longer-term supply agreements.

Product Description

The lower anvil block is the stationary base that supports the lower die in a forging hammer. It must withstand the full impact force transmitted through the workpiece and upper die, making material choice and processing critical. This model is produced from cast steel and uses a permanent casting mold, a process that generally yields consistent wall thickness and reduced porosity compared to one-time sand molds. The permanent mold designation also supports repeatable grain structure across production batches, which can be an advantage when multiple replacement anvils must match in mechanical behavior.

Surface treatment includes heat treatment, a necessary step for toughening the steel and improving resistance to fatigue cracking under repeated hammer blows. A wear-resistant topcoat is specified as the coating, directly targeting the surface degradation that leads to dimensional drift and reduced die life. The surface roughness is controlled to Ra0.8, a relatively fine finish that minimizes friction at the die interface and helps maintain planar alignment. Machining tolerance is held to ±0.02mm, which is tight for a component of this size and contributes to accurate seating within the hammer frame.

Key specifications supplied by the manufacturer are summarized below:

ParameterSpecification
Model NO.Lower anvil
Casting MetalCast Steel
Casting Form Usage CountPermanent
Surface TreatmentHeat Treatment
Surface RoughnessRa0.8
CoatingWear-Resistant Topcoat
Machining Tolerance±0.02mm
StandardASTM
CertificationISO 9001:2000, ISO 9001:2008

Buyer benefits derived from these specifications include:

  • Permanent mold casting supports repeatable quality for ongoing replacement programs.
  • Heat treatment increases core strength and resistance to fatigue cracking.
  • Wear-resistant topcoat reduces surface degradation under repeated impact.
  • Tight machining tolerance (±0.02mm) helps maintain hammer alignment and prolong die life.
  • Customizable specifications allow adaptation to different forging hammer models.
  • ASTM standard and ISO 9001 certification provide a baseline for quality assurance.

Company Profile

Huixian Tengfei Machinery Manufacturing Co., Ltd. is based in Xin Xiang, Henan, China, and reports a production capacity of 30,000 tons per year. The company supplies girth gears, gears, slag pots, and related metallurgy machinery components, indicating a focus on heavy industrial manufacturing and casting work. The anvil block is offered under the Tenfaye trademark and is available at a price range of US$1,400 to US$2,100 per unit, depending on customization and order specifics.

With ISO 9001:2000 and ISO 9001:2008 certifications, the firm operates within a quality management framework suitable for casting and machining operations. Buyers evaluating long-term partnerships may note that the company’s product range extends beyond anvil blocks, which can simplify sourcing for multiple wear parts from a single manufacturer.

Quality & Compliance

Die Forging Lower Anvil Block/Cast Steel Anvil Base for Forging Hammer

Compliance with ASTM standards is listed for the anvil block, aligning with common expectations for cast steel components in industrial machinery. Heat treatment and the wear-resistant topcoat are applied to address the two primary failure modes in forging anvils: surface wear and internal fatigue. Machining tolerance of ±0.02mm and surface roughness of Ra0.8 are measurable quality parameters that buyers can verify upon receipt, either through in-house metrology or third-party inspection.

Die Forging Lower Anvil Block/Cast Steel Anvil Base for Forging Hammer

Transport packaging is available via sea, land, or air, offering flexibility for different logistics timelines. The component is shipped with package dimensions of 100cm × 100cm × 100cm and a gross weight of 1,000kg, which should be accounted for in handling and rigging plans. Buyers are encouraged to request material certifications and first-article inspection reports from the supplier to confirm conformance before full deployment.

Buyer Checklist

Die Forging Lower Anvil Block/Cast Steel Anvil Base for Forging Hammer

Before finalizing a purchase order, sourcing teams may evaluate the following yes/no points:

  • Does the anvil block meet the required ASTM standard? (Yes – supplier lists ASTM)
  • Is heat treatment applied to the casting? (Yes – surface treatment: Heat Treatment)
  • Does the component include a wear-resistant topcoat? (Yes – coating specified)
  • Is the machining tolerance within ±0.02mm? (Yes – supplier-stated tolerance)
  • Is the supplier ISO 9001 certified? (Yes – ISO 9001:2000 and ISO 9001:2008)
  • Can dimensions be customized to match existing hammer frames? (Yes – specification: customizable)

CTA

For sourcing managers evaluating replacement anvil blocks or new forging hammer installations, this cast steel lower anvil block offers a combination of heat treatment, wear resistance, and tight tolerance control. To request detailed drawings, confirm lead times, or obtain a customized quote, contact Huixian Tengfei Machinery Manufacturing Co., Ltd. directly. Current pricing starts at US$1,400 per unit, and customization options are available to meet specific hammer configurations.

Disclaimer

The information in this article is based on supplier-provided data and has not been independently verified by SourceFactories. Buyers should confirm specifications, certifications, and delivery terms with the manufacturer before placing an order.

Related product: Die Forging Lower Anvil Block/Cast Steel Anvil Base for Forging Hammer

Disclaimer: The copyright of this article belongs to the original author. If there is any source error or infringement of your legitimate rights and interests, you can contact us by phone and we will handle it promptly.

More Industry News