Ningbo Justop Medical Instruments Co., Ltd. Launches JUSTOP DT-200 Digital Height and Weight Floor Scale with 100g Division

Clinics and health screening programs still rely on analog height rods and separate bathroom scales, creating double data entry and transcription errors. Ningbo Justop Medical Instruments Co., Ltd. addresses that workflow gap with the JUSTOP DT-200…

Product Description

The JUSTOP DT-200 pushes beyond the single-metric floor scale. Built around a 372 × 272 mm platform and a 70–190 cm height measurement range, the unit gives screening staff one device for two measurements. Weight division is 100 g, and the listed accuracy is 100 g (3.53 oz). Maximum capacity is available in 150 kg or 200 kg versions, with a minimum capacity of 2 kg.

The display uses LED readout, which remains legible in typical indoor lighting. The scale carries a medium grade III precision classification and is specified for operation between 0°C and 40°C. That temperature window suits most clinic hallways, occupational health rooms, and screening stations — not outdoor or cold-chain environments. Sourcing teams that have been patching together analog height rods and standalone scales may find the DT-200 reduces equipment count and streamlines calibration reviews, since both measurements live in one device.

For buyers, the practical takeaways are straightforward:

• One unit replaces separate height rod and weighing scale at screening stations
• 100 g division supports consistent weight recording in clinical paperwork
• LED display needs no backlight calibration for indoor use
• OEM support lets distributors or private-label programs apply their own branding
• One-year warranty covers the first full annual maintenance cycle

Installation & Operation Notes

The DT-200 ships as a single item. Packing data lists one unit per carton measuring 89 × 33 × 27 cm with a gross weight of 12 kg. The scale itself weighs 15 kg, which gives enough mass to stay put on a level floor without requiring bolting.

Facilities should place the unit on a flat, hard surface within its 0–40°C operating range. Because the platform is 372 × 272 mm, foot placement is straightforward for adult users; buyers should confirm that the 70–190 cm height rod range covers the expected population. No special electrical setup is indicated in the listing — the LED display simply reads the measured values. For calibration or service intervals beyond the one-year warranty, buyers need to contact the supplier directly.

Applications

Instruments and meters buyers see digital floor scales across a widening set of use cases. The DT-200’s combined height and weight output fits health screening workflows where staff previously recorded two values from two devices. Occupational health providers, school health programs, and medical practices that run routine biometric checks are the most direct fit. The 70–190 cm height rod makes the DT-200 a human-centric floor scale; buyers evaluating animal weighing should confirm whether the OEM can adapt the design.

Because Ningbo Justop Medical Instruments Co., Ltd. also lists animal, ophthalmic, dental, and other medical products, the DT-200 can fit into broader purchasing programs rather than standing alone. That matters when sourcing teams prefer to consolidate vendors across equipment categories. The 150 kg and 200 kg capacity options let buyers match the unit to their local population profiles.

Buyer Checklist

Before requesting samples or confirming an order, category managers can run through these data-driven checks:

• Does the screening environment stay between 0°C and 40°C? If not, ask supplier for alternative operating ranges.
• Is a 70–190 cm height measurement range sufficient for the intended users?
• Will the 100 g division meet clinical or occupational documentation requirements?
• Is 150 kg or 200 kg maximum capacity adequate for the population served?
• Is OEM branding or private-label packaging needed for the distribution channel?
• Is a one-year warranty acceptable for the product life cycle?

Company Profile

Ningbo Justop Medical Instruments Co., Ltd. operates from Zhejiang, China, and lists product categories that include animal, medical, ophthalmic, dental, and other instruments. The company supports OEM customization on the DT-200, indicating a sourcing model that can accommodate distributor branding.

For procurement teams, that profile means the DT-200 is not a one-off unit; it sits inside a broader catalog that may reduce supplier count across adjacent equipment categories. Buyers should ask for the latest line card and minimum order terms when evaluating this model.

Next Step for Sourcing Teams

The DT-200’s listed price range of US$59.50–US$85.00 reflects the entry-level to higher-capacity or customized variants. Sourcing directors evaluating digital height and weight scales can request a detailed quotation and confirm current lead times directly with the supplier.

Disclaimer

Specifications and pricing are provided by the supplier and are subject to change. Buyers should verify all parameters, warranty terms, and certification requirements with Ningbo Justop Medical Instruments Co., Ltd. before placing an order.

Related product: Digital Height and Weight Scale Manufacturer - Smart Electronic Weighing