Sourcing Metal Feeders for Pigs in SS304? Key Sourcing Considerations

An importer reviewing stainless steel farm equipment often asks: can a single supplier cover both pig feeders and metal fabrication reliability across custom lengths? The SS304 feeder from Ningbo Fulei Metal Products Co., Ltd. presents a low-cost option…

At a Glance: Key Procurement Signals

When a buyer first lands on this listing, the headline data raises both interest and caution. Ningbo Fulei Metal Products Co., Ltd. offers a stainless steel pig feeder at a unit price between US$1.00 and US$10.00, with a stated annual production capacity of 50,000 pieces. That price range, combined with custom length options, makes it a candidate for farm equipment distributors looking for OEM flexibility.

However, the listing's category placement under 'Consumer Electronics > Mobile Phone & Accessories > Other Mobile Phone Accessories' and the application field mentioning 'Cable Wiring, Plarform Building Ladder Cable Tray' suggest a possible data mismatch. Procurement teams should treat this as a signal to clarify the product's true primary use before sending an RFQ.

• Unit price: US$1.00–10.00 (customization may affect final cost)
• Annual production capacity: 50,000 pcs/year
• Material: Stainless Steel (product name specifies SS304)
• Customization: specification listed as 'customized'
• Listed application: includes cable tray and platform ladder, not just pig feeding

Product Description and Fabrication Specs

The product is described as 'Efficient Sheet Metal Fabrication Metal Feeders for Pigs SS304.' The name emphasizes pig feeders, but the fabrication method is welding and the surface treatment is polishing. These are standard for stainless steel food-contact equipment, assuming the feeder is intended for animal use. The listed length options—2400, 3000, 5800, and 6000 mm—are more typical of industrial components like cable trays than small animal feeders, which warrants a direct specification check with the supplier.

The table below summarizes the key attributes from the listing. All values are as provided by the supplier and should be confirmed for the buyer's specific application.

Note that the finishes listed include HDG (hot-dip galvanized) and powder coating, which are not typical for food-contact pig feeders but common for cable trays. This reinforces the need to ask the supplier whether the SS304 polished version is the standard for pig feeders or if those finishes are for other product lines. The packaging uses bubble film with double layers, which may be adequate for small parts but could be insufficient for long cable trays without additional crating.

Applications and Fit Criteria

The dual nature of the application field—pig feeder on one hand, cable tray on the other—gives procurement teams a useful filter. If your sourcing requirement is for stainless steel pig feeders, ask whether the SM001 model is specifically designed for animal feeding or if it is a general-purpose sheet metal fabrication that can be adapted. The welded, polished SS304 construction suggests food-safe potential, but without a certification mention, that remains unverified.

For buyers in the electrical or construction sectors, the 'Cable Wiring, Plarform Building Ladder Cable Tray' application may be the actual intended use. The length options up to 6000 mm and width up to 1000 mm fit standard cable tray dimensions. The finishes (HDG, powder coating, EG) also align with cable management products rather than livestock equipment. A procurement team should weigh these clues against the product name and ask pointed questions before committing to a sample order.

• If sourcing pig feeders: confirm internal dimensions, feed capacity, and edge finishing for animal safety.
• If sourcing cable trays: verify load rating, perforation pattern, and compliance with local electrical codes.
• Either way, request a spec sheet that clearly separates model SM001's capabilities for each use case.

Company Profile: Ningbo Fulei Metal Products Co., Ltd.

Ningbo Fulei Metal Products Co., Ltd. is a China-based metal fabricator. The seller's product list includes a broad range of sheet metal items: feeders, sheets, brackets, library carts, bookends, cable trays, HVAC systems, pig equipment, chicken equipment, tissue boxes, and holders. This suggests a custom fabrication shop with multiple industries served, rather than a specialist in livestock equipment alone.

For this SKU, the supplier reports a production capacity of 50,000 pieces per year, which is moderate for sheet metal fabrication. The listing does not include certifications, so buyers must request relevant compliance documents (e.g., food-contact material certs, ISO if required). Origin is China, and the HS code 7308900000 covers other structures and parts of iron or steel, aligning with general metal fabrication.

Next Steps for Buyers

Given the low price range and customization option, this SKU is worth an RFQ, but only after clarifying the application mismatch. Here is a practical sequence for procurement teams.

1. Send the supplier a drawing or dimension request for a pig feeder (or cable tray) with your specific length, width, and gauge requirements.
2. Ask for a material certificate confirming SS304 grade and surface finish (polished vs. other).
3. Request a sample or at least detailed photos of the welding quality and edge finish.
4. Confirm whether the unit price of US$1.00–10.00 applies to the custom size you need, and what minimum order quantity (MOQ) applies—though the listing does not state an MOQ, all OEM orders typically have one.
5. Clarify packaging: the listed double-layer bubble wrap may be sufficient for light parts, but for long cable trays, ask about wooden crate reinforcement.

Do not skip the spec confirmation step. The price is attractive, but a wrong application match could lead to costly returns or field failures.

FAQ

Q: What material is this feeder made of?
A: The product name specifies SS304 stainless steel, and the listing's material field states 'Stainless Steel.' Buyers should request a mill test certificate to confirm the exact grade.

Q: Can the length be customized?
A: Yes—the specification attribute is listed as 'customized.' Standard length options shown are 2400, 3000, 5800, and 6000 mm, but other sizes may be possible upon request.

Q: What is the supplier's production capacity for this SKU?
A: The listing indicates an annual production capacity of 50,000 pieces. This is a moderate volume that should be verified against your lead time requirements.

Disclaimer

This article is for procurement evaluation only and is based solely on the product listing data provided by Ningbo Fulei Metal Products Co., Ltd. The information has not been independently verified. Buyers should conduct their own due diligence, including confirming specifications, certifications, and application suitability, before placing orders. No endorsement or warranty is implied.

Related product: Efficient Sheet Metal Fabrication Metal Feeders for Pigs SS304